VP Hardware Review: Avatar Mesh Tank Nano by Vapeston

Vapeston are a Chinese company based in Shenzhen. They have several tanks to their name which seem to be built for high wattage sub-ohm vaping.

I was at the latest Vaper Expo UK back at the beginning of May and I met the guys from Vapeston and they asked me if I would do a review of their newest tank. I was given the Avatar Mesh Tank Nano for the purpose of review.

There are some great tanks on the market at the moment and designs of tanks have stayed pretty much the same for a while now. It is however the coil that is where the battle is in my eyes. Companies creating a stock coil that not only delivers great flavour but a coil that is going to give the consumer longevity as well. Not only will I be looking at the build quality of the tank but more importantly how the coil performs with the tank. Please read on and I will go through my thoughts on the device.

Avatar Mesh Tank Nano

 

What comes in the box:

  • 1 x Avatar Mesh Tank Nano
  • 1 x Spare Pyrex Glass
  • 2 x NX1 Mesh coils 0.15Ω (1 x pre-installed)
  • 1 x Bag of Spare O rings
  • 1 x Instruction Leaflet

 

Taking a look at the tin/packaging

The tank comes in a mesh styled tin with a cardboard sleeve. On the front of the sleeve you will find the company logo, the name of the tank, a coloured sticker to indicate the colour of the tank and a nicotine warning label.

On the back of the sleeve you will find the company address, warnings and warning symbols, contents of the tin and another nicotine warning label.

On one side you will find the company logo and the name of the tank and on the other, another company logo and the type of coil.

The Avatar Mesh Tank Nano specifications:

  • Material – Stainless Steel/Resin
  • Capacity – 2ml
  • Height – 47.5mm
  • Width – 24mm
  • Weight – 46g
  • 510 connector
  • 810 Drip Tip
  • Colours – Black, Red, Purple, Rainbow and Blue (which is the one I have)

 

Taking a look at the tank

The resin 810 cobra style drip sits well into a metal socket. The metal top cap has a resin covering. When taken off the cap reveals a couple of wide holes for filling the tank, the top cap twists off on some smooth threads.

At the base of the tank there is two good sized airflow holes which are adjustable, they spin all the way round as they have stoppers as you can see in the images below.

 

In the top two images below you can see the two sides to the top cap. Bottom left you can the top of the tank and two large juice fill holes. Bottom right you can see the base of the tank with the name of the tank, serial number and a gold plated adjustable 510 pin. I would advise that this tank is not used on a mechanical MOD.

In the images below you can see a close up of the mesh coil and the packed cotton.

Thoughts and Conclusions

To start with I have to say that the build quality of this tank is fantastic, all the threads are clear and smooth. I like how the drip tip sits in a metal socket. The resin finish is also stunning.

I have found that I needed to work the coil in a little to get its full potential. The flavour is great from the start, but like a good wine, it gets better with age. There is also great vapour production from this tank and with the large airflow you can fog out a room in no time at all.

Not necessarily a negative but I feel that I should point it out, it it is a little noisy when in use. A bit like hearing wind through a narrow channel.

I have had no problem with the life of the coils, getting a good couple of weeks out of them.

All in all a well built, great performing tank and for me certainly has its place along side some of the leading best selling mesh coil tanks on the market.

Pros

  • Great build quality
  • As the coil ages the flavour gets better
  • Great vapour production
  • Coils last well

Cons

I don’t have any, maybe the noise but with it performing so well it is something I quickly forget.

 

If you require further information on Vapeston.

You can do this by going to http://www.Vapeston.com or click here.

You can also find them on social media;

Instagram: @VapestonOfficial

Twitter: @Vapeston

Facebook: /Vapeston

I’d like to say thank you to the guys of Vapeston for giving me this tank for review.

If you have enjoyed reading this review then please click the like button at the bottom and please leave a comment it would be good to hear your thoughts.

If you think that there is a juice/vendor out there that you think I should try or you are a company and would like me to do a review, you can contact me via the following:

Email: hello@vapingpogonophile.com

Twitter: @v_pogonophile

Instagram: @vapingpogonophile

Facebook: FaceBook.com/vapingpogonophile

Website: www.vapingpogonophile.com

Have a dapper day cloud chasers!

There have been a few changes to the way I write my review to be compliant with the TPD/TRPR regulations that came into force on the 20/05/17. If you would like any further details on the regulations, please click here.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s